LE200T
1U size 200G transponder.
LE200T is a transponder. Suitable for constructing a large capacity optical transmission network of 200G.Two waves of 100G client signals are aggregated into a 200G line, and the AMP installed inside the device enables long-distance transmission even in 1U size.It also has a GCC in-band channel. Supports remote monitoring of opposite devices. Ensure high availability and reliability. Ideal for large-capacity transmission between bases such as between data centers and university campuses.
- It is equipped with four 200G uplinks.Two 100GE or OTU4 ports can be used for each uplink port.
- Optical module for client port: 8 x 100G QSFP28 SR4 / LR4 / ER4
- Uplink compatible optical module: 200G CFP2-DCO
- Client interface: 100GE, OTU4
- The power supply unit can be loaded with AC power and DC power. Optical module, power supply unit, fan unit can be hot swapped.
- EDFA(Preamplifier) installed.
- 1U,19 inch rack size compact size.
- No limit on the frame length that can be transmitted.
- LOS Propagation function (link disconnection transfer function)
- Simple setup and management. ・Web GUI,SNMP,Syslog,RADIUS,telnet/ssh,Console ・Inband GCC or OSC remote management ・Performance features(Optical input / output monitor,Line quality monitor) ・FEC(Forward Error Correction) Function support ・Loopback test function ・Remote power failure detection function(Dying gasp)
- Equipped with FAN (automatic speed control) *The FAN unit has an automatic speed control mechanism that provides power saving.
LE200T
Spec
| Models | LE200T | |
|---|---|---|
| Local interface | Number of Ports | 8 |
| Interface | 100G QSFP28 SR4/LR4/ER4,OTU4 | |
| Data rate | 103.1Gbps~112Gbps | |
| Connecter | QSFP28 transceiver | |
| frame length | No restrictions | |
| Remote interface (Dark fiber connection port) | Number of Ports | 4 |
| Wavelength | DWDM ITU-T G.694.1,C-Band | |
| Applicable optical fiber | SMF, DSF | |
| Light power dissipation | 28～32dB(When using an amplifier equipped with 200T) | |
| Management port | Console port | Interface: RJ-45 Connector: 8pin, Type D, Transfer rate:9600bps |
| Management port | 10/100 BASE-T port | |
| Remote management channel | GCC (General Communication Channel) | |
| Management IP address | Manual Configuration(Console) | |
| Alarm display, Monitoring | Alarm | Viewable 512 events immediately (GUI), timestamp,Layer1/2 PM/OTN PM/Optical PM |
| Power | Power supply Hot Swap |
AC100V～240V／AC 50/60Hz DC: -48V DC(Max.8.2A) |
| Power consumption | 250W | |
| Dimensions Physical specification | Dimensions | 440mm(W)x287mm(D)x44mm(H), 1U |
| Weight | 6.15Kg (when only power supply x 2 and FAN x 1 are installed), Max.8.5Kg (when module is installed maximum) | |
| Operating Temperature/Humidity | -5℃～50℃/5%～85% (no condensation) | |
| Approvals | REACH, CE, FCC,RoHS Compliant | |