PEX3001bt NEW
PEX3001bt is a 10G compatible PoE injector that can supply up to 90W of power in compliance with the IEEE802.3af / at / bt standard. By using this product, it is possible to install PoE compatible devices in places where it is difficult to secure a power source while minimizing the impact of existing network configurations and costs. In addition, it supports a wide range of operating temperatures from -20 ° C to 50 ° C, making it suitable for use in harsh environments such as factories and warehouses where the temperature is high. High power consumption PoE ++ IP cameras, wireless access points, etc. can be easily added at low cost.
Features
- Supports IEEE802.3af / at / bt devices.
- Supports 10/100/1000Mbps , 2.5/5/10Gbps Ethernet.
- Supports power supply up to 90W.
- Wall installation possible.
- Overvoltage protection function (OVP) / overcurrent protection function (OCP) / short circuit protection function (SCP) compatible.
- MTBF over 200,000 hours in a 45 ℃ environment.
- Surge protection device .
Spec
Models | PEX3001bt | ||
---|---|---|---|
Ports | LAN port*1 PoE port*1 |
||
Ethernet specifications | 10GBASE-T | IEEE802.3an | |
2.5G /5GBASE-T | IEEE 802.3bz | ||
1000BASE-T | IEEE802.3ab | ||
100BASE-TX | IEEE802.3u | ||
10BASE-T | IEEE802.3 | ||
PoE function | IEEE802.3af/at/bt Compliant | ||
PoE port power supply specifications (Type4 / Class8 PSE) | Power supply voltage: DC53~57V Maximum power supply current: DC1.7A Maximum power supply: 90W Power supply method: Alternative A (MDIX) [1-2 minus, 3-6 plus] Alternative A (MDI-X) & Alternative B(S) [4-5 plus,7-8 minus] |
||
Applicable cable | 10GBASE-T | Category 6A or More | |
5GBASE-T | Category 6 or More | ||
2.5GBASE-T | Category 5e or More | ||
1000BASE-T | Category 5e or More | ||
100BASE-TX | Category 5 or More | ||
10BASE-T | Category 3 or More | ||
PoE/PoE+/PoE++ | Category 5e or More | ||
Connecter | RJ-45 type 8-pole connector | ||
Maximum transmission distance | 100m (LAN port transmission distance + PoE port transmission distance) | ||
AC input | AC inlet standard | IEC320-C6 | |
Input voltage range | AC90~264V | ||
Rated input voltage | AC100~240V | ||
frequency | 50/60Hz | ||
Maximum input current | AC1.2A | ||
Maximum input | 105W | ||
Maximum power consumption | 15W | ||
Maximum calorific value | 13kcal/h | ||
General specifications | Size | 150mm(W)× 65mm(D)×33.4mm (H) | |
Weight | 355g | ||
Operating temperature / humidity | -20 ̊C ~50 ̊C /5%~90% *No condensation |
||
Storage temperature / humidity | 30 ̊C ~80 ̊C /5%~95% *No condensation |
||
reliability | MTBF 440,322h (45℃) | ||
EMI | VCCI class A | ||
Cooling system | Fan-less | ||
Items | Installation Guide & Warranty card *1 Power cable (1m) x 1 |