Product

NS2028VPEL

10/100/1000BASE-T RJ45 x 28 ports SFP combo port x 4 ports Smart switch with PoE function

"NS2028VPEL" has 20 PoE ports for 10/100/1000BASE-T, Smart switch with PoE function with 4 SFP slots. As an L2 function, it is equipped with a private VLAN function that blocks communication between each port, and as a video data control function, it is equipped with a multicast stream function using IGMP snooping and multicast filtering. It supports storm control and QoS flow control, and has sufficient functionality as a PoE switch with management functions. In addition, since it is equipped with a static route function, it is possible to create a configuration in which networks are virtually separated by VLAN.

NS2028VPEL

View

NS2028VPEL

  • NS2028VPEL

Features

  • NS2028VPEL is equipped with RJ45 x 28 ports and SFP combo port x 4 ports
  • Supports static routing function
  • Supports jumbo frames (up to 10,000 bytes)
  • Supports 8,192 MAC address entries
  • Supports WEBGUI management screen operation
  • Compatible with IPv6 addresses
  • Supports IEEE802.3af/at
  • Maximum PoE budget: NS2028VPEL (370W)
  • Supports PoE scheduling function
  • Supports IEEE802.1q VLAN, port-based VLAN, private VLAN, and dynamic VLAN
  • Supports STP (IEEE802.1d standard), RSTP (IEEE802.1w standard), MSTP (IEEE802.1s standard)
  • Supports storm control function (Broadcast/Multicast/Unicast)
  • MAC-based ACL, supports IPv4/IPv6 ACL
  • Equipped with QoS function
  • Energy saving IEEE802.3az compliant EEE power management compatible
  • RoHS compatible
  • Equipped with auto fan function

Spec

Models NS2028VPEL
Ports 10/100/1000M RJ45 28port
10/100/1000M RJ45
or 1G SFP combo port
4 combo ports
Port settings Port enable/disable Supported
Auto-MDI/MDIX function Supported
Auto negotiation function Supported
HoL blocking prevention Supported
flow contro Supported
Standards IEEE802.3z,IEEE802.3ab,IEEE802.3u, IEEE802.3,IEEE802.3x,IEEE802.1D, IEEE802.1w,IEEE802.1s,IEEE802.1p, IEEE802.1QIEEE802.3ad,IEEE802.1X, IEEE802.1af/at,IEEE802.3az
Data transfer method Store & forward method
Applicable cable 1000BASE-X MMF/SMF fiber
1000BASE-T Category5e or higher (UTP or STP)
100BASE-TX Category5 or higher (UTP or STP)
10BASE-T Category3 or higher (UTP or STP)
Transmission distance up to 100m
Transmission speed 10/100/1000Mbps
jumbo frame size 10,000bytes
total throughput 41.7Mpps(64byte)
switch fabric 56Gbps
frame buffer 512KB
MAC addresses 8,192
PoE function power supply port 1-24 port
Maximum power supply
capacity
370W
IEEE802.3af compliant Support (supplies up to 15.4W per port)
IEEE802.3at compliant Support (supplies up to 30W per port)
Power supply PIN
assignment
1,2 and 3.6
L3 function static route
loop detection Shutdown, automatic recovery
storm control Support
rate limit 64*(1-15625) kbps (ingress, egress)
port trunk
(Static/LACP)
Static 8 ports/20 groups
LACP 8 ports/28 groups
VLAN 802.1Q VLAN Tagging,GVRP, Port-based VLAN,Private VLAN, Create multiple uplink ports Isolated,Community.Multi Grouping Protocol-based VLAN,MAC-based VLAN, Voice VLAN
Traffic priority QoS CoS/802.1p, DSCP, QoS function, Scheduling sp, wrr,congestion avoidance tail-drop
Time synchronization SNTP
multicast IGMPv1/v2/v3 (only v3 supported) IGMP Snooping v1/v2/v3 (only v3 supported)
Security ACL, IPv6 ACL, DHCP snooping,IPv6 DHCP snooping
management Web management
LED display PWR Power ON, normal (green light)
power OFF (light off)
Reload (blinking green)
PoE-MAX
(PoE Power MAX)
PoE power consumption is PoE budget Less than 90%: (off)
PoE power consumption is PoE budget 90% or more: (lit orange)
FAN Error Normal: (off), Abnormal: (red lit)
LOOP Normal time: (off)
LOOP detected on any port: (lit red)
LINK/ACK LED PoE mode: (off)
Port-LED indicates port status: (solid green)
PoE LED LINK/ACK Mode: (Off)
Port-LED indicates PoE status: (solid green)
Port LED (in LINK/ACT mode) Link not established: (off)
1000Mbps link up: (green light)
10/100Mbps link up: (lit orange)
Port LED (in PoE mode) No power supply, PD not detected:(off)
When powered by PoE: (Lights green)
PoE error: (lit orange)
power Rated input/frequency AC100-240V, 50/60Hz
Maximum input current
(at maximum PoE powerconsumption)
0.38A PoE: 4.43A
Maximum power
consumption PoE power supply
442W
Maximum power consumption
when PoE is not used
27.3W
Maximum calorific value 23.47 kcal/h
energy saving Energy consumption efficiency (W/Gbit/s) 0.975 W/Gbit/s
Division A
Maximum effective
transmission speed(Gbit/s)
28 Gbit/s
dimensions 440(W)×250(D)×44(H)mm
weight 3.96kg
Operating temperature/humidity 0℃~ +50℃ / 10% ~ 90%
*No condensation
Storage temperature/humidity 40℃~ +70℃ / 5% ~ 95%
*No condensation
cooling method fan cooling
Compliance EMI VCCI class A
reliability 393,369 h
environment RoHS compliant
Supplies Installation Guide & Warranty card *1
PSE Power Cable *1
Rack-mount kits
Rubber Feet 4pcs

Page Top