NS2010VPEL
NS2010VPEL is the web-based Smart PoE Switch which has PoE 8 ports of 10/100/1000BASE-T and 2 slots of 100/1000BASE-X.
NS2010VPEL is the web-based Smart PoE Switch which has PoE 8 ports of 10/100/1000BASE-T
and 2 slots of 100/1000BASE-X.
This PoE switch supports IEEE802.3af/at and can supply 30w perport and is provided with the max 75w budget in entire PoE system.
As it is management L2 switch, NS2010VPEL supports Private-vlan function to prevent client’s
communication between each of ports, IGMP Snooping and Multicast-filtering for the control of
streaming data, and then flow-control function of storm-control and QoS function.
That proves this PoE switch is the good performance switch as edge-switch.
In addition, NS2010VPEL is designed with fan-less and small-size, that’s why this design is in
consideration of client’s environment and NS2010VPEL is possible to be located on a limiting space
of equipment area in office and hotel as so on.
Features
- Implement 10/100/1000BASE-T*8 ports and 100/1000BASE-X*2 slots
- Jumbo frame 10,000bytes
- 8,192 tables of mac-address
- Support WEB/GUI management and in-band management (telnet/SSH/SNMP)
- Support multi management VLAN
- Support dual area of startup-config
- Support dual area of Firmware
- Support IPv6 addressing
- Fan-less design
- Support IEEE802.3af/at
- Max PoE budget 75w
- Support PD scheduling function
- Support IEEE802.1q VLAN, port-based VLAN, private- VLAN, voice- VLAN
- Support STP (IEEE802.1d standard), RSTP (802.1w standard), MSTP (802.1s standard)
- Support storm control (unknown-unicast/broadcast/multicast)
- Support loop-detection function
- Support MAC-based, IPv4/v6-based ACL
- Support CoS/DSCP, 8 que priority and QoS scheduling (SP and WRR)
- Support L2 security function (Mac-address filtering, multicast filtering)
- Support IGMP snooping/MLD snooping for the control of multicast data.
- Support EEE power-saving management standardized by IEEE802.3az
- Support RoHS
Spec
Models | NS2010VPEL | |
---|---|---|
Standards | IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.1D, IEEE802.1w, IEEE802.1s, IEEE802.1p, IEEE802.1Q, IEEE802.3ad, IEEE802.1X, IEEE802.1af/at, IEEE802.3az, IEEE802.3z | |
Data Transfer Speed | 10/100/1000Mbps(CSMA/CD) | |
Ethernet Ports | 10BASE-T/100BASE-TX/1000BASE-T RJ45×8 | |
Speed/Duplex/MDI/MDIX | Supported | |
Auto Negotiation | Supported (Transfer speed, Full/Half can be set for each ports) | |
Applicable Cable | ||
1000BASE-X: MMF / SMF fiber | ||
1000BASE-T: Category 5e or More (UTP or STP) | ||
100BASE-TX: Category 5 or More (UTP or STP) | ||
10BASE-T: Category 3 or More (UTP or STP) | ||
Features | Switching Mode | Store & Forward Method |
Throughput | 14.9Mpps(64byte) | |
Switching capacity | 20Gbps | |
Buffer Size | 512Kbytes | |
Flash Memory | Flash: SPI 32MB/RAM:DDRⅡ256MB | |
Maximum MAC Address | 8,192 | |
ARP Table | 8,192 | |
IP Address Table | Up to 500 (IPv6-shared) | |
ACL Entries | Up to 150 | |
Port Function | Port Admin Status Change, Auto-MDI/MDIX, Auto-Negotiation, Speed / Duplex / MDI Fixed, HoL Blocking Prevention, Flow Control(half duplex support, Full duplex IEEE802.3x standard) |
|
Loop Protection | Shutdown (only port), Auto Recover | |
Rate Limit | 64*(1-15625) kbps (ingress, egress) | |
Spanning Tree | IEEE802.1D STP, IEEE802.1w RSTP, IEEE802.1s MSTP | |
Port Trunk (Link Aggregation) | Static: Maximum 8 ports / 4 groups LACP: Maximum 10 ports /4 groups |
|
VLAN | IEEE802.1Q VLAN Tagging, Port-based VLAN, VLAN(ID1-4094), Private VLAN, Multiple Uplink Port, Isolated, Community, Voice VLAN |
|
Traffic Priority QoS | CoS/802.1p, DSCP, Priority Queuing 8steps, QoS Scheduling (sp, wrr), Congestion Avoidance (Tall-drop) | |
Multicast | IGMP v1/v2/v3, IGMP Snooping v1/v2/v3 | |
Jumbo Frame Size | 10000bytes | |
Function | Management | Web Management, SNMP(v1/v2c/v3), SNMP over IPv6, Syslog (IPv4/v6), LLDP, Firmware (Update, Multiple Save Area of FW) |
Security | MAC Address Filtering, ACL, IPv6 ACL, DHCP Snooping, IPv6 DHCP Snooping, HTTPS | |
Others | DHCP Client, Port Mirroring (1:1, 1: N), Storm Control (Broadcast / Multicast / Unknown Unicast) | |
PoE Function | PoE Supply Port | PoE+ (30w) |
Maximum Supply Capacity | 75W | |
IEEE802.3af standard | 15.4W/port (Max) | |
IEEE802.3at standard | 30W/port (Max) | |
Power Supply PIN Assign | 1,2 and 3.6 | |
LED | PWR | Power-on (Green Lightning), Reloading (Green Blinking), Power-off (Light off) |
PoE-MAX | PoE power budget achieves the max budget (Amber Lightning)Switch has still spare PoE budget (Light off) | |
Port LED (Link/ACT) | 1000BASE-T link-up (Green Lighting), 1000BASE-T data transmitting (Green Blinking), 10/100BASE-TX link-up (Amber Lighting) 10/100BASE-T data transmitting (Amber Blinking) No link (Light off) |
|
SFP Port LED(LINK/ACT) | 1000BASE-X link-up (Green Lighting), 1000BASE-X data transmitting (Green Blinking), 100BASE-FX link-up (Amber Lighting) 100BASE-FX data transmitting (Amber Blinking) No link (Light off) |
|
L/A and PoE mode display | L/A: Green Lighting, PoE: Off This mode shows port status mode *this mode can be shifted to PoE mode L/A: Off, PoE: Green Lighting This mode shows PoE status mode *this mode can be shifted to Port mode |
|
LED | Rated input | AC100-240V, 50/60Hz |
Maximum Input Current (with PoE Function) | 0.28A(1.16A) | |
Max. Power Consumption (with PoE Function) | 114.2W | |
Maximum Power Consumption | 13.7W | |
Maximum Heat Generation | 98.2 kcal/h | |
Energy Conservation Act | Energy Consumption Efficiency (W/Gbit/s) | 1.37W/Gbit/s |
Class | A | |
Maximum Effective | 10Gbit/s | |
Energy Conservation Act(Law) Criterial Fail or pass | pass | |
Energy Conservation Achievement Rate | 234% | |
Operation Temperature / Humidity | -5℃~+50℃/0%~95% *Non-condensing | |
Storage Temperature / Humidity | −20℃~+70℃/0%~95% *Non-condensing | |
Cooling System | Fan-less | |
Dimension (W*D*H) | ||
Device: 280(W) *126(D) *44 (H) mm | ||
AC adapter :139(W)*58(D)*31(H) | ||
Weight | 0.95kg (not include adapter) | |
Adaptation of EMI | VCCI class A | |
Adaptation of RoHS | RoHS | |
Reliability (25℃) | MTBF 835,328 h | |
Reliability (25℃) | Installation Guide & Warranty card *1 PSE Power Cable *1 PSU *1 Rack-mount kits Plate*2, Screw*8 Rubber Feet 4pcs |