Products

NS105RS/NS1008RS NEW

NS105RS and NS1008RS are light weight and compact size, making it ideal for installing small spaces such as offices.
These have a loop detection function, even in environments where loops are likely to occur, You can use it with confidence.

NS105RS

View

NS105RS

  • NS105RS

Features

  • NS105RS comes with 5 RJ45 port 10/100Mbps fast Ethernet ports
    NS1008RS comes with 8 RJ45 port 10/100/1000Mbps fast Ethernet ports
  • Supports auto-negotiation, and auto MDI/MDI-X.
  • FAN-less design.
  • LED or Loop detection function of LED and beep sound installed
  • Supports jumbo frames (maximum 9,216 bytes).
  • NS105RS: Supports 64,000 MAC address entries.
    NS1008RS: Supports 64,000 MAC address entries.
  • Each flow control function provided for IEEE 802.3x (in full duplex) and back pressure (in half duplex).
  • Employs lightweight, compact plastic housing. You can set it steadily anywhere with strong magnets
  • Transmission of EAP, BPDU, LACP, LLDP, IGMP and tag frames.
  • Supports EEE power management compliant with energy-saving IEEE 802.3az.
  • compliant with energy-saving IEEE 802.3az.
  • VCCI Class B

Spec

Models NS105RS ES1008RS
Ethernet Ports   10/100M RJ45×5
MDI/MDI-X auto switch
10/100/1000M RJ45×8
MDI/MDI-X auto switch
Duplex Full/Half
Auto Negotiation Supported
Features Switching Mode Store & Forward Method
Throughput 0.74Mpps(64byte) 11.9Mpps(64byte)
Switching capacity 1.0Gbps 16Gbps
Flow control full-duplex IEEE802.3x
half-duplex Back pressure
Buffer Size 128Kbyte 192Kbyte
Flash Memory 2MBytes 16K Bytes
MAC Address 2,112(Max) 4,160(Max)
Loop Detection LED and Beep
Frame Transparent   EAP/ BPDU/ LACP/ LLDP/ IGMP Frame supported
LED PWR Power On (Steady Green), Power Off or Abnormal (Off)
Loop detect (Blinking Red slowly)
  Link/Act Valid connection (Steady Green),
Traffic is transmitting and receiving (Blink Green fast)
Loop detect (Blink Green slowly and sync power red LED),
No network connection (Off)
Slide Switch Loop Detection ON/OFF LED and Beep
Slide Switch Switch Loop Detection by LED/OFF
Power supply Rated input AC100-240V, 50/60Hz
Max. Input 0.5A 0.5A
Max. Consumption 1.7W 4.1W
Cooling system   natural cooling (fanless)
Required Humidity & Temp. During Operation 0℃~ 50℃/10%~90% Non-Condensing
During Non-Operation -20℃~ 70℃/5%~90% Non-Condensing
Size 192(W)x83(D)x35(H) mm
Weight 227g 256g

Page Top