FXC9432
Layer-3 Switch With Management Function
You can also build a network with IPv6 alone. The FXC9432 contains two power slots in a single cabinet and supports IGP/EGP routing.
This L3 core switch is perfect for almost any type of network environment!
The FXC9432 is a routing stackable switch with management function, incorporating 24 10/100/1000BASE-T RJ45 ports, four RJ45/1G SFP combo ports, and four 1/10GBASE-R SFP ports.
The FXC9432 supports a large variety of routing protocols as well as IPv6 routing, and functions as the core switch for small-scale, complex networks used in multi-cast routing etc.
The FXC9432 supports IEEE 802.1Q tag VLAN, protocol-based VLAN and Voice VLAN as well as port-based VLAN and includes such security functions as 802.1x authentication and Web redirect authentication, enabling it to manage a large variety of network environments such as hotels, offices, apartments, condominiums and schools.
The 10G ports on the front of the cabinet enable stacking of up to nine units to create a network configuration that allows future port expansions and exhibits high fault tolerance.
Features
- Includes 24 RJ45 ports, 4 RJ145 or SFP ports, and 4 ports each for SFP/SFP+ (1G/10G).
- Supports jumbo frames (maximum 9,216 bytes).
- Supports 64,000 MAC address entries.
- Supports outbound management interfaces (SNMP, Http, Https, Telnet, SSH) through management console ports, inbound management and MGMT ports.
- Includes automatic fan control function for higher reliability and noise suppression.
- Supports redundant power supply.
- Enables IPv6 management and IPv6 routing.
- CISCO-like command line interface.
- Supports port-based VLAN, IEEE 802.1Q VLAN, Voice VLAN and Q-in-Q (double tagging) functions.
- Includes IEEE 802.3x (in full duplex mode) and flow control functions.
- Each port supports 802.1p, DSCP and TOS QoS.
- Features a loop detection function.
- VLAN registration and Guest VLAN suitable for IEEE 802.1x security function included.
- Support of STP (IEEE 802.1d compliant), RSTP (802.1w compliant) and MSTP (802.1s compliant).
- Ring protocol compliant to with ITU-T provided for a smart redundancy configuration.
- As IP multicast, FXC9432 supports multicast VLAN transmission, query, fast leave, filtering, group restriction and PIM in IGMP snooping and IGMP expansion functions.
- Supports packet control in L2 to L4, ACL800 and IPv6 ACL with the ACL functions.
- Enables input and output rate control for each port.
- Supports broadcast, multicast and unicast storm control.
- Supports ARP inspection and IP source guard.
- FXC9432 enables management via network through compliance with SNMP. Equipped with RMON 1, 2, 3 and 9.
- Supports DDMI of an SFP transceiver.
- Supports upload and download of text-based configuration.
- Enhanced security against fraudulent access through the DHCP Client, DHCP Option 82 Relay and DHCP snooping functions.
- RIP, OSPF, ECMP, IS-IS, BGP and Static routing supported as an L3 routingprotocol
- Enables EEE power management compliant with energy-saving IEEE 802.3az
- Compliant with the RoHS Directive
- Optional Units (not included in FXC9432)
- FXC9432-RPU15 AC redundant power unit for FXC9432
- FXC9432-RPU45 DC redundant power unit for FXC9432
- SFP+10G-CU1M Direct-attach cable for SFP+ (1m)
- SFP+10G-C3M Direct-attach cable for SFP+ (3m)
Spec
| Models | FXC9432 | |
|---|---|---|
| Standards | IEEE802.3z, IEEE802.3i, IEEE802.3u, IEEE802.3ab, IEEE802.3ae, IEEE802.3x, IEEE802.1D, IEEE802.1w, IEEE802.1s, IEEE802.1p, IEEE802.1Q, IEEE802.3ad, IEEE802.1X, IEEE802.3az |
|
| Ethernet Ports | 10/100/1000M RJ45×28、10/100/1000M RJ45 or 1G SFP Combo Port×4, 1G/10G SFP+×4 | |
| Duplex | Full | |
| Auto Negotiation | Supported | |
| Cable Used | 10BASE-T | UTP Category 3 and Up |
| 100BASE-TX | UTP Category 5 and Up | 1000BASE-T | UTP Category 5e and Up |
| Features | Switching Method | Store & Forward Method |
| Throughput | 102Mpps(64byte) | |
| Switching Capacity | 136Gbps | |
| Buffer Size | 4.0Mbyte | |
| Flash Memory | Flash: SPI 512MB / RAM: DDRⅡ 1024MB | |
| MAC Address Table | 64,000 (Max) | |
| VLAN | IEEE802.1Q Tagging, IEEE802.1Q VLAN Tag QinQ, GVRP, Port-basedVLAN, VLAN(ID4095), PrivateVLAN(Up-link Port, isolated, Community, MultiGrouping), Protocol-based VLAN, MACbased VLAN, Subnet-based VLAN, Voice VLAN |
|
| Port Trunk | Static 8-64 ports(Max),32-256Group(Max) | |
| IP Multicast | IGMP v1/v2/v3, IGMP Snooping v1/ 2/3, MLD Snooping v1/v2, Multicast routing,MVR | |
| Spanning Tree | IEEE802.1D STP , IEEE802.1w RSTP ,IEEE802.1s MSTP | |
| QoS | CoS/802.1p, DSCP,Traffic Classes(8 active priorities), Policy-map(CBWFQ), scheduling, Convergence migration | |
| Port configuration | Speed/Duplex configuration, HOL, Flow Controller、Port Status, Auto-MDI/MDIX, AutoNegotiation | |
| Jumbo Flame | 9,216bytes(Max) | |
| Bandwidth Control | 64kbps～10,000,000kbps | |
| Management | Web management, CLI(RJ45, Mini USB), Telnet, SMTP, SNMP(v1/v2c/v3), SNMP over IPv6, LLDP, RMON, sFlow, Syslog(IPv4/v6), SMTP | |
| Security | IEEE802.1x, Port Security, authentication、DHCP Snooping, IPv6 DHCP snooping, IP Authentication, IP Source Guard, IPv6 Source Guard, IP DHCP Snooping, ARP inspection, ARP spoofing, SSH v1/v2, SSHV6, HTTPS, Dos protection, CPU Protection, Dynamic/Guest VLAN, ACL, IPv6 ACL, Web Redirect Authentication | |
| Others | DHCP server(IPv4/v6), DHCP Client, Loop Protection,Stormcontrol(Broadcast/Multicast/Un icast), Port Mirroring( 1 : N ), Hardware Stacking Function(9MAX*SFP/SFP+ Direct Attach Cable available), NTP/SNTP, RIP/RIPng, OSPF/OSPFv3, ECMP, IS-IS/IS-ISv6, BGP/BGP+4, IPv6 DHCP relay, Ping IPv4/v6, Traceroute IPv4/v6, ICMPv6 | |
| Power | Rated input voltage/frequency | AC100-240V、50/60Hz |
| Max. Input | 2A | |
| Max. Power Consumption | 40W | |
| Max. Calorific Value | 34.4Kcal/h | |
| Required Humidity & Temp. | During Operation | 0℃～50℃/10%～90% Non-Condensing |
| During NonOperation | -40℃～70℃/5%～90% Non-Condensing | |
| Size | 440(W)×280.5(D)×44(H)mm | |
| Weight | 4.31kg (include PSU×1) | |
| Standards | VCCI Class A | |