Product

FXC5224PE

PoE Giga Ethernet layer 2 switch with 8 or 16 or 24 10/100/1000 Mbps ports and 2 100/1000 Mbps (SFP) ports
UTP ports 1 to 8 or 1 to 16 or 1 to 24 are equipped with a PoE power-feeding function compatible with IEEE802.3af/at standards, a maximum power of 30 W being supplied to each port (150 W/220W/370W in total).

FXC5224PE

View

FXC5224PE

  • FXC5224PE

Features

  • Equipped with 8 or 16 or 24 10/100/1000 Mbps Giga Ethernet ports
    (with the PoE power-feeding function).
  • Equipped with a PoE power-feeding function compatible with IEEE802.3at
    (30 W per port maximum).
  • PoE power supply scheduling function and power-receiving terminal status confirmation available.
  • Two SFP slots enable optical module (option).
  • Supports Port Trunk and LACP (compatible with IEEE802.3ad).
  • Supports STP (compatible with IEEE802.1d), RSTP (compatible with IEEE802.1w),
    and MSTP (compatible with IEEE802.1s).
  • Supports port-based and IEEE802.1Q VLAN.
  • Supports various management functions such as SNMP.
  • Supports loop detection/blocking function.
  • Supports IEEE802.1x and equipped with web authentication function to ensure more secure environment.
  • Supports broadcast/multicast/unicast storm control.
  • Supports jumbo frames (up to 9,600 bytes).
  • Restricts multicast data with IGMP snooping function to secure optimal performance.
  • Enhanced security against unauthorized access with DHCP snooping and IP Source Guard.
  • Comfortable voice network while fulfilling QoS.
  • Port-mirroring function enables traffic monitoring of arbitrary ports and easy fault handling.
  • Supports energy-saving EEE power management compatible with IEEE802.3az.
  • PoE functions and features
    • PoE auto checking: Regularly monitors the condition of power-receiving terminals and automatically
      restarts them if there is no response.
    • PoE configuration: Enables not only power feeding depending on the 802.1at (af) classes, but also manual setting of feeding values and setting of priorities.
    • PoE forward delay: Enables settings such as sequential activation of multiple terminals by delaying their power supply times.
    • PoE scheduling: Enables settings of power supply dates and times for each port according to the environment in which they are used. Power consumption can be reduced by setting power supply for a necessary time zone (for example, 9:00 a.m. to 6:00 p.m. on weekdays).
Models FXC 5224PE
Standards IEEE802.3,IEEE802.3u,IEEE802.3ab,
IEEE802.3x,IEEE802.1s,IEEE802.1Q,
IEEE802.1D,IEEE802.1af/at,IEEE802.1w,
IEEE802.1x,EEE802.3ad,IEEE802.3az
Ethernet
Ports 		  10BASE-T/100BASE-TX/1000BASE-T
（Auto MDI/MDI-X function settings）
24
Duplex Duplex Full/Half
Auto Negotiation Supported
（Transfer speed, Full/Half can be set for each ports）
Expansion Slots 4(SFP)
FXC5224PE 10BASE-T/100BASE-TX/1000BASE-T 21-24
port cannot be used together
Features Switching Mode Store & Forward Method
Throughput 35.7Mpps
(64byte)
Switching capacity 48Gbps
Buffer Size 512Kbytes
MAC Address 8,192 （Max）
VLAN IEEE802.1Q tagging, IEEE802.1Q VLAN Tag Q-in-Q,
Port Based VLAN, VLAN(ID4095), Private VLAN, Voice-
VLAN
Spanning Tree IEEE802.1D, IEEE802.1w,IEEE802.1s
Others QoS, Flow Controller, Storm
Controller(Broadcast/Multicast/Flooded unicast Rate),
Port Mirroring(1:N), LACP(IEEE802.3ad), Jumbo
frame(9,600bytes), DHCP .Snooping, DHCP Client,
Loop Detection, DHCP option82 relay
PoE
Function		 PoE Supply Port 1～24
Maximum Supply
Capacity 		443W
IEEE802.3af
standard 		15.4W/port(Max)
IEEE802.3at
standard 		30W/port(Max)
Power Rated input
voltage/frequency 		AC100-240V, 50/60Hz
Max. Power
Consumption		 443W(PoE370W)
Max. Calorific
Value 		381Kcal/h
Size 440(W)x191(D)x44.5(H) mm
Weight 3.13kg
Operation Temperature /
Humidity
0℃～+50℃/10%～90% ※Non-condensing
Storage Temperature /
Humidity 		−20℃～+70℃/10%～90% ※Non-condensing
Supplies AC100V power cable, 19 inch rack mount kit, RS232C
Cable, 4 Rubber Buttons, Manual, Guarantee

Page Top