FXC5218
High-performance and fan-less gigabit switch
FXC5200 series provides you with max. 24 (24/16/8) 10/100/1000 Mbps ports and is usable as a core switch of a gigabit switch.
It realizes fan-less design and low power consumption.
FXC5224 is equipped with four SFP slots (combo port), and they can be optionally replaced with 1000BASE-X fiber gigabit ports. FXC5218/5210 provides two ports for SFP slots and can be simultaneously used with 10/100/1000 Mbps ports.
Features
- Full gigabit composition equipped with 8/16/24 of 10/100/1000BASE-T ports.
- Equipped with SFP slots. FXC5218/5210 can be simultaneously used with a 10BASE-T/100BASETX/1000BASE-T port (FXC5224 provides combo ports).
- Fan-less silent design for a comfortable environment.
- Energy-saving design with IEEE802.3az (EEE) and power management.
- Supports IEEE802.1d (STP) and IEEE802.1w (RSTP).
- Equipped with DHCP/MLD Snooping.
- Supports link aggregation (compatible with IEEE802.3ad/static).
- QoS identifies important data to ensure smooth data communication.
- Supports port-based VLAN, private VLAN, and IEEE802.1Q VLAN.
- Supports jumbo frames (maximum 9 KB).
- Supports IEEE802.1x port authentication for security.
- Equipped with loop detection function.
- IPv6 Ready Logo Phase-2 ensures compatibility with products of other manufacturers in an IPv6 network.
- Supports SNMP for easy management via a network.
- Switch management and setting are possible via IPv6 address, as well as with IPv4.
- Port-mirroring function enables traffic monitoring of arbitrary ports and easy fault handling.
- Management and setting are possible through a website browser.
- Duplex
- Full/Half
- Auto Negotiation
- Supported
(Transfer speed, Full/Half can be set for each ports)
Spec
Models | FXC5218 | |
---|---|---|
Standards | IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3ab, IEEE802.3x, IEEE802.1p, IEEE802.1Q, IEEE802.1D, IEEE802.1ac, IEEE802.1w, IEEE802.1x, IEEE802.3ad, IEEE802.3az | |
Ethernet Ports | 10BASE-T/100BASE-TX/1000BASE-T (Auto MDI/MDI-X function settings) | |
16 | ||
Duplex | Duplex Full/Half | |
Auto Negotiation | Supported(Transfer speed, Full/Half can be set for each ports) | |
Expansion Slots | 2(SFP) | |
FXC5224 10BASE-T/100BASE-TX/1000BASE-T 21-24 port cannot be used together | ||
Features | Switching Mode | Store & Forward Metho |
Throughput | 26.7Mpps (64byte) | |
Switching capacity | 36Gbps | |
Buffer Size | 512Kbytes | |
MAC Address | 8K (Max) | |
VLAN | IEEE802.1Q tagging VLAN/Port Based VLAN/Private VLAN/Tunneling Protocol/Guest VLAN/Dynamic VLAN/Protocol VLAN/GVRP/Voice-VLAN | |
Spanning Tree | IEEE802.1d, IEEE802.1w,IEEE802.1s | |
Others | QoS, Policy-map, Flow Controller, Storm Controller(Broadcast/Multicast/Flooded unicast Rate), Port Mirroring, Trunk, LACP(IEEE802.3ad), Jumbo frame, DHCP .Snooping, DHCP Client, Power Saving, Loop Detection, DHCP option82 relay | |
Power supply | Rated input | AC90-264V, 50/60Hz |
Max. Input | 0.25A | |
Max. Consumption | 14W | |
Required Humidity & Temp. | During Operation | 0℃~50℃/10%~90% Non-Condensing |
During NonOperation | 0℃~70℃/10%~90% Non-Condensing | |
Size | 250(W)x117(D)x37 (H) mm | |
Weight | 1.0kg |