LE2842 series
- LE2842-02(RJ45 to 2km MMF(SC)MC)
- LE2842-15(RJ45 to 15km SMF(SC)MC)
Features
- Media converter for conversion of IEEE802.3/IEEE802.3u-compliant 10BASE-T/100BASE-TX and 100BASE-FX.
- DIP switches enable manual setting for 100BASE-TX (full/fixed)/auto-negotiation.
- DIP switches enable manual setting for LFP (Link Fault Pass-through) OFF/ON.
- DIP switches enable the 10/100BASE-TX port to be fixed to MDI or MDI-X.
- LEDs are displayed on the front panel, enabling easy segmentation.
- Supports in-band management (TTC-TS1000-compliant).*
- When used in a rack, hot-swap function is available
- Supports ALS (Auto Laser Shutdown).
- Remote power outage notification.*
- Tag frame/QinQ double-tagged frame/EAP/BPDU transparent.
*LE2020 or LE2002 and LE2930 required.
Spec
Models | LE2842-02 | LE2842-15 | |
---|---|---|---|
Standards | IEEE802.3、IEEE802.3u | ||
Transmission speed | 10/100Mbps(CSMA/CD) | ||
Ethernet Ports | 10BASE-T/100BASE-TX | 1port(MDI/MDI-X auto switch) | |
Duplex | Full/Half | ||
Auto Negotiation | Supported | ||
Transceiver | 100BASE-FX x1port | ||
MMF 2km/SC connector | SMF 15km/SC connector | ||
Wavelength | 1310nm | ||
Output | -20dBm~-14dBm | -15dBm~-5dBm | |
Receiving sensitivity | -31dBm~0dBm | -35dBm~-3dBm | |
Communication function | link fault pass through(LFP) (Default:OFF) | ||
Transmission mode | Converter mode/Switching mode | ||
Maximum frame size | Converter mode:9Kbyte Switching mode:2046byte | ||
Rated input voltage/frequency AC power | AC100V/50/60Hz | ||
Maximum power consumption | 5.0W | ||
User Environmental | Operating Temperature/Humidity | 0℃~50℃/10~90% (no condensation) | |
Dimensions | 88mm(W)x139mm(D)x23.5mm(H) without detachable parts | ||
Physical specification | 400g (without AC adapter) | ||
Accessories | AC adapter、product warranty |