Product

FXC5428

10 Giga Uplink Stackable Switch with L2+ Management Function

FXC5428

View

FXC5428

  • FXC5428

Features

  • A stackable switch with 24 RJ45 Ports, 4 Ports (1/10G) SFP+ 10 Giga Uplink and stackable switch with L2+ Management Function
  • FXC5428 is a stackable switch with an L2+ management function installed with 24 RJ45 ports for 10/100/1000BASE-T and four SFP+ ports for 1/10GBASE-R.
  • The RJ45 ports support the auto negotiation function and auto MDI/MDI-X function. FXC5428 builds a switching environment at a 1G full wire speed and enables uplink connection in a wide band. FXC5428 is most suitable in for a network environment that requires a high data rate.
  • FXC5428 supports 10k jumbo frames and ensures smooth traffic with the QoS functions for port based LANs, IEEE 802.1Q and Voice VLANs. Additionally, full security functions including IEEE 802.1X authentication are provided.
  • A maximum of 16 units can be stacked and further expansions are easy using a dedicated SFP+ direct-attach cable.
  • These functions and features allow quick switching in case of a band expansion or a fault, enabling a network of high reliability and stability to be built.
    • FXC5428 comes with 24 RJ45 ports, 4 SFP and 4 SFP+ (1G/10G) ports.
    • Hardware stacking is possible using two SFP+ ports.
    • Supports jumbo frames (maximum 10,056 bytes).
    • Entry of 32,763 MAC addresses supported.
    • Supports management console ports and inbound management interfaces (SNMP, Http, Https, Telnet, SSH)
    • IPv6 management enabled.
    • CISCO-like command line interface.
    • Support of auto negotiation and automatic switching of MDI and MDI-X.
    • Supports Voice VLANs in addition to port-based VLANs and IEEE 802.1Q VLANs.
    • Loop detection and shutdown function provided.
    • Provides Q-in-Q (double tagging) function.
    • VLAN registration and Guest VLAN functions provided, tailored to IEEE 802.1x security function.
    • Supports STP (IEEE 802.1d compliant), RSTP (IEEE 802.1w compliant) and MSTP (IEEE 802.1s compliant).
    • The IGMP Snooping function restricts multicast data to ensure optimum performance.
    • The ACL function enables packet control of L2 to L4.
    • Enables control of input and output rates for each port.
    • Enables storm control in broadcast, multicast and unicast.
    • Supports SFP transceiver DDMI.
    • Supports config upload and download on a text basis.
    • Each flow control function provided for IEEE 802.3x (in full duplex) and back pressure (in half duplex).
    • Static routes can be set as an L2 expansion function.
    • DHCP Client, DHCP Option 82 Relay, DHCP Snooping.
    • Compliance with SNMP enables management via a network. RMON1, 2, 3 and 9 provided.
    • The port mirroring function enables easy troubleshooting by monitoring traffic at any port.
    • uitable for EEE power management compliant to with energy-saving IEEE 802.3az.

Spec

Models FXC5428
Standards IEEE802.3、IEEE802.3u、IEEE802.3ab、IEEE802.3ab、IEEE802.3x、IEEE802.1D、IEEE802.1w、IEEE802.1s、IEEE802.1p、IEEE802.1Q、IEEE802.3ad、IEEE802.1X、IEEE802.3az
Ethernet Ports 10/100/1000M RJ45×24、1G/10G SFP(SFP+)×4(2ports can be used as hardware stacking port)
Duplex Full/half
Auto Negotiation Supported
10BASE-T/100BASE-TX/1000BASE-T × 24ports(MDI/MDI-X Automatically recognized )
Cable Used 10BASE-T UTP Category 3 and Up
100BASE-TX UTP Category 5 and Up
1000BASE-T UTP Category 5e and Up
Features Switching Method Store & Forward Method
Throughput 95.2Mpps（64byte）
Switching Capacity 128Gbps
Buffer Size 4.0Mbyte
Flash Memory Flash: SPI 16MB / RAM: DDRⅡ 128MB
MAC Address Table 32,763 （Max）
VLAN IEEE802.1Q Tagging、IEEE802.1Q VLAN Tag Q in Q、Port-based VLAN, VLAN(ID1-4095), Private VLAN、Protocol-based VLAN, MAC-based VLAN, Subnet-based VLAN, Voice VLAN
Port Trunk Static 8 ports(Max),16Group(Max)、LACP 168 ports(Max),16 Group(Max)
IP Multicast IGMP Snooping v1/v2/v3, MLD Snooping v1, MVR
Spanning Tree IEEE802.1D STP, IEEE802.1w RSTP, IEEE802.1s MSTP
QoS CoS/802.1p, DSCP,Traffic Classes(8 active priorities)
Port configuration Speed/Duplex configuration、HOL、Flow Controller、Port Status
Jumbo Flame 10,056bytes(Max)
Bandwidth Control 100kbps～1Gbps
L2+ DHCP （ Option82 ）, IPv4 static routes （Max32）
Management Web management, CLI(D-Sub9), Telnet, SNMP(v1/v2/v3), LLDP, RMON, Syslog, SMTP
Security Port Security, authentication, DHCP Snooping, IP Source Guard, MAC AddressFiltering, SSH, HTTPS, ACL, Dynamic/Guest VLAN, sFlow
Others DHCP, Loop Protection, Storm control(Broadcast/Multicast/Unicast), Port Mirroring( 1 : N ), Hardware Stacking Function(16MAX, SFP+), NTP
Power Rated input voltage/frequency AC100-240V, 50/60Hz
Max. Input 0.65A
Max. Power Consumption 37.3W
Max. Calorific Value 32Kcal/h
Required Humidity & Temp. During Operation 0℃～50℃/10%～90% Non-Condensing
During NonOperation -20℃～70℃/10%～90% Non-Condensing
Size 440(W)×172(D)×44(H)mm
Weight 2.61kg
Standards VCCI Class A,

Page Top