Products

NC1G-PE series

10/100/1000BASE-T to 1000BASE-X Media Converter (PoE Type)

NC1-PE Series Media Converter is media converter converting 10/100/1000BASE-T and 1000BASE-X mutually.
This product is equipped with 10/100/1000Mbps RJ45 port and 1000BASE-X SFP port. This product operates by PoE power supply.
In addition, this product is equipped with the LFP (Link Fault Pass-through) function, and it helps to investigate the cause when a failure occurs.
Our lineup is of the following three types: 1000BASE-SX SFP mounted model, 1000BASE-LX SFP mounted model, Bi-directional 1G SFP (LC or SC) mounted model. And Bidi models are must use A type and B type in 1 pair.

LEX1542-02/15

View

NC1G-PoE

  • LEX1542-02/15

Features

  • 10/100/1000Mbps RJ45 port and 1000Mbps SFP port by one each.
  • RJ45 port is support Auto-negotiation and Auto MDI/MDI-X
  • Flow control for Full Duplex operation and back pressure for Half Duplex operation (IEEE 802.3x)
  • Compliant with SFP MSA Specification SFF-8472
  • 1000BASE-SX type is up to 550m with 50/125µm MMF
  • 1000BASE-LX type and Bidi type are up to 15km with 9/125µm SMF
  • Bidi type supports wavelength 1310nm (A type) and 1550nm (B type)
  • Support for 1.25Gbps Bit Rate
  • Simplex SC/LC Connector Interface
  • Supports 9,216 bytes Jumbo Frames
  • Supports 2,112 MAC address entries in entire system
  • Supports LFP (Link Fault Pass-through) function
  • Wire-speed packet filtering and forwarding rate
  • Store-and-forward architecture filters fragment & CRC error packets
  • EAP/ BPDU/ LACP/ LLDP/ IGMP and Tag Frame Pass through
  • FAN less
  • Class 1 laser product complies with EN 60825-1
  • Temperature Range: 0~ 50 °C
  • RoHS compliant
  • Reliability compliant with Telcordia (Bellcore)
  • GR-468-CORE
  • Power supply via PoE(802.3af)

Spec

Models NC1GS-PE NC1GL-PE NC1GL15A-PE
NC1GL15B-PE		 NC1GL15A-SC-PE
NC1GL15B-SC-PE
Standards IEEE802.3z, IEEE802.3ab, IEEE802.3u, IEEE802.3, IEEE802.3x, IEEE802.3af
Transmission speed 10/100/1000Mbps (CSMA/CD)
Ethernet Ports
   10BASE-T/100BASE-TX/1000BASE-T (MDI/MDI-X Auto)
Duplex
Auto Negotiation		 Full／Half
1000M/Full
Fiber ports Transceiver 1000BASE-SX (550m) 1000BASE-LX (15km)
Connector LC Connector SC Connector
Duplex
Auto Negotiation		 Full
1000M/Full
TX Wavelength   850nm MMF 1310nm SMF A: 1310nm SMF
B: 1550nm SMF		 A: 1310nm SMF
B: 1550nm SMF
Output   -9.5～-3dBm
Receiving sensitivity   -17～-0dBm -20～-3dBm -21～-3dBm
Cable standards 10/100/1000BASE-T 10/100/1000BASE-T 1000BASE-LX
Cable used and
Maximum distance		 UTP Cat.5e and over 100m 50/125μm MMF 550m 62.5/125μm MMF 275m UTP Cat.5e 100m
9/125μm SMF 15km
10/125μm SMF
Function Frame Transparent link fault pass through (LFP)
EAP/BPDU/LACP/LLDP/IGMP, Tag Frame Pass through
Transfer speed Port Assignment Store & Forward Method
Maximum Frame Size Jumbo Frame Size 9,216bytes
Through Put   2.97Mpps(64byte)
Latency   2.5μs (64byte)
Wire Speed   support
Buffer Architecture Port Allocation Dynamically allocated to each port
Flash Memory Capacity 128K
MAC Address Table Method Self-learning
Aging Time 300sec
Maximum MAC Address 2,112
LED Display Power Power On (Steady Green), Power Off (Off)
LAN Link/Act Valid port connection (Lighting)
Data Transmitting / Receiving (Blinking)
1000Mbps: (Green), 10/100Mbps: (Orange)
Fiber Link/Act Valid port connection (Lighting)
Data Transmitting / Receiving (Blinking)
1000Mbps: (Green), 10/100Mbps: (Orange)
Power Supply /
Energy Conservation		 Power Supply, Rated Input 57VDC (IEEE802.3af, class0)
Rated Maximum Input Current 300mA　or less
Maximum Power Consumption 3W(Typ.2W) or less
Maximum Heat Generation 2.236Kcal/h
General specification Dimensions (W*D*H) 75(W) × 101.2(D) ×22.6(H)mm (SFP not included)
Weight 200g (SFP not included)
Operation Temperature / Humidity 0℃～+50℃ / 0%～90% *Non-condensing
Storage Temperature / Humidity -20℃～+70℃ / 5%～90% *Non-condensing
Cooling systems Fan-less
Adaptation of EMI VCCI class A
Adaptation of RoHS RoHS Directive Compliance
MTBF 5,107,077h(25℃)
Accessories   Installation Guide & Warranty card x 1

Page Top